Products
Loftmasts
Total quality
Performance on the water is directly influenced by your mast’s carbon content.
More carbon means expanded reactivity, performance you can feel.
Utilizing high-modulus carbon pre-preg, Loftmasts are built to last. Loftmasts are controlled in design and production to flexwith a “constant curve” which measures 64% at the base (lower ¼), 76% at the top (upper ¼).
Advanced construction equals advanced performance
Autoclave process
Loftmasts are constructed using carbin fiber pre-pregs which are cured using a tempspecific autoclave process. The result produces masts with the highest possible laminate qualities: no air entrapment for maximized mast integrity.
Carbon fiber layers
Loftmasts include an inner spiral of carbon for compression strength. Three layers of unidirectional carbon run longitudinally (without crimp) for maximum compressive strength. Loftmasts production processes allow the fiber layers to be controlled in spacing and distribution so mast flex “fine tuning” becomes possible.
Integrated ferrule
The mast joint is built with an integrated ferrule that eliminates mast pre-bend… Loftmasts flex curves remain accurate and performance is optimized.
Specification
Loft Mast Team Edition 100% Carbon RDM
Loft Mast 100% Carbon RDM - BICO
Loft Mast 75% Carbon SDM
Loft Mast 75% Carbon RDM
Loft Mast 55% Carbon SDM
Loft Mast 55% Carbon RDM
Loft Mast 75% Carbon RDM - Junior
- Trim
- The Loft Adjustable Outhaul - packed with every sail from The Loft
- Downhaul for light winds
- Downhaul for strong winds
- Outhaul tension
- Boom height
- Harness lines
- Footstrap position
- Mast stiffness
- Tests
- Forum
- Brand
- Monty Spindler
- The Loft Sails
- Technology
- Team
- Contact
- Distribution
- Equipment registration
- Gallery
