Performance on the water is directly influenced by the carbon content of your mast. Greater carbon content = optimum performance. Carbon turbo-charges your windsurfing experience. Performance you can feel...

All Loft Masts are 100% high-modulus carbon pre-preg:

Autoclave processes
Loftmasts are constructed using carbin fiber pre-pregs which are cured using a temp-specific autoclave process. The result produces masts with the highest possible laminate qualities: no air entrapment for maximized mast integrity.

Carbon fibers layers
Loftmasts include an inner spiral of carbon for compression strength. Three layers of unidirectional carbon run longitudinally (without crimp) for maximum compressive strength. Loftmasts production processes allow the fiber layers to be controlled in spacing and distribution so mast flex “fine tuning” becomes possible.

Integrated-ferrule
The mast joint is built with an integrated ferrule that eliminates mast pre-bend… Loftmasts flex curves remain accurate and performance is optimized.

Length cm	Carbon %	IMCS	Weight KG	Dedication
RDM 370	80%	17
RDM 400	80%	19
RDM 430	80%	21

Length cm	Carbon %	IMCS	Weight KG	Dedication
RDM 340	65%	14
RDM 370	65%	17
RDM 400	65%	19
RDM 430	65%	21
RDM 460	65%	25
RDM 490	65%	29

Length cm	Carbon %	IMCS	Weight KG	Dedication
SDM 370	80%	17
SDM 400	80%	19
SDM 430	80%	21
SDM 460	80%	25
SDM 490	80%	29

Length cm	Carbon %	IMCS	Weight KG	Dedication
SDM 370	48%	17
SDM 400	48%	19
SDM 430	48%	21
SDM 460	48%	25