Products Forum Gallery Contact
News
Technology
Trim
Tests
Team
Distribution
Monty
Download
Links
Site map
 The Loft | Products

The Loft's top priority is windsurfing performance.
The Loft's philosophy is to maximize wind range, minimize the number of sail lines.
 The Loft | Sails 2008

» Download 2008 Sails Specification

The Loft | Masts & Booms

 The Loft | Essential Accessories

 
 
 
 
 The Loft | Masts

Performance on the water is directly influenced by the carbon content of your mast. Greater carbon content = optimum performance. Carbon turbo-charges your windsurfing experience. Performance you can feel...

All Loft Masts are 100% high-modulus carbon pre-preg:

  • the fastest possible reflex-response,
  • the lightest possible weight,
  • the greatest possible rig stability... windsurfing unlimited.

    Utilizing 100% high modulus carbon pre-preg, Loftmasts are built to last...

    Loftmasts are carefully controlled in design and construction to have "constant-curve" flex character. All Loftmasts measure 64% bend at base (lower 1/4), 76% bend at tip (upper 1/4).

    The LoftMast range 2007 is quality and simplicity.

    •  The Loft | Advanced construction = Advanced performance

    Autoclave processes
    Loftmasts are constructed using carbin fiber pre-pregs which are cured using a temp-specific autoclave process. The result produces masts with the highest possible laminate qualities: no air entrapment for maximized mast integrity.

    Carbon fibers layers
    Loftmasts include an inner spiral of carbon for compression strength. Three layers of unidirectional carbon run longitudinally (without crimp) for maximum compressive strength. Loftmasts production processes allow the fiber layers to be controlled in spacing and distribution so mast flex “fine tuning” becomes possible.

    Integrated-ferrule
    The mast joint is built with an integrated ferrule that eliminates mast pre-bend… Loftmasts flex curves remain accurate and performance is optimized.

     Download brochure (pdf) | 0.19mb

     Download LoftMasts product range with IMCS (pdf) | 0.1mb

     The Loft | Loftmast 2008 RDM


    Loftmast 100% RDM Carbon
    340 | 370 | 400 | 430 | 460 | 490
    This mast has no rivals when going for maximum reflex response and durability- ideal for big wave sessions and perfect for our Blades when going for a Speed World Championship (all cams contact the red&black external wear layer). 
    Our exclusive red&black external wear layer extends the length of the lower section, and the bottom 40cm of the upper section.


    Loftmast 80% RDM Carbon
    340 | 370 | 400 | 430 | 460 | 490
    Our exclusive red&black external wear layer located at the boom zone.


    Loftmast 65% RDM Carbon (no photo)
    340 | 370 | 400 | 430 | 460 | 490
    Affordable durability and performance.  All black finish.
     The Loft | Loftmast 2008 NDM


    Loftmast 100% Carbon NDM
    340 | 370 | 400 | 430 | 460 | 490 |520 | 550
    Maximum reflex response in a normal diameter. Our exclusive red&black external wear layer located at the boom zone.
     


    Loftmast 80% Carbon NDM
    370 | 400 | 430 | 460 | 490
    Our exclusive red&black external wear layer located at the boom zone.
     

    Loftmast 48% Carbon NDM (no photo)
    370 | 400 | 430 | 460
    Affordable durability.  All black finish.